Tom Hanson   

Las Cruces Gunsmith

formerly

Hudson Trading Post

Ph (845) 901-1270  Email guns@hudsontradingpost.com

Muzzle Breaks

 

Tom Hanson, The Las Cruces Gunsmith has developed a muzzle brake or recoil compensator that can be either fitted to, or attached as a permanent part of, the muzzle of a rifle or pistol.  It redirects propellant gases  from the side and top to counter gun recoil and unwanted rising of the barrel without any downward gas to kick up dust. These devices are useful for combat and timed competition shooting, and are commonly installed on rifles firing large cartridges (such as big-game rifles). The greater the gas volume the greater the counter force. I have designed and use a spring tension recoil measuring fixture that clearly shows significant reduction in recoil for even light recoiling rifles. The pictured break is on a Browning X Bolt rifle in .338 Win Mag. This light weight rifle, when tested without the break, had extreme muzzle flip and and rearward movement of nearly 3 inches. A tested 300 Win Mag recoiled 2.15 inches which took 51.5 lbs of static weight to move the fixture the same distance. With the break on the 338 there was no muzzle flip and a measure movement of 2.25 inches. A graph below will show results of other tests.

LCGS22-50V - Mako Shark

Price $65.00 for 7/8 OD with 1/2 x 28 or 5/8 x 24

OD smaller than 7/8 will give lower recoil reduction.

The Mako can be custom made for any caliber or barrel size. Threads are cut to fit any previously threaded barrel. Standard sizes are 1/2 x 28 and 5/8 x 24.

Muzzle Brake Recoil Chart

 

 

  2002 Hudson Trading Post all rights reserved.  
Page last updated on 06/23/2016